0.9-5 mm columnar activated carbon

The extruded pellet form gives a low system pressure drop, which is an important consideration in the gas-phase uses. Markets lie in solvent recovery, gas purification and automotive emission control, where the high volume activity, low pressure drop and high stock resistance of extruded carbon enable them to last the entire life of the vehicle.

Description

Activated carbons have a large adsorption capacity, preferably for small molecules, and are used for purification of liquids and gases.

These are cylindrical pellets with diameter ranging from 0.9 mm to 5 mm.

TypeDiameterAsh content%Hardness%Specific gravity(g/lMethyl Blue (mg/g)Iodine(mg/g)Solution of ash %
0.90.9mm2-15%90300-60025-125500-13000.5
1.51.5mm2-15%90300-60025-125500-13000.5
22.0mm2-15%90300-60025-125500-13000.5
33.0mm2-15%90300-60025-125500-13000.5
44.0mm2-15%90300-60025-125500-13000.5
55.0mm2-15%90300-60025-125500-13000.5
66.0mm2-15%90300-60025-125500-13000.5
77.0mm2-15%90300-60025-125500-13000.5
88.0mm2-15%90300-60025-125500-13000.5
99.0mm2-15%90300-60025-125500-13000.5

Typical applications are:

  1. Removal of volatile organic compounds such as Benzene, TCE, and PCE.
  2. Hydrogen Sulfide (HS) and removal of waste gases
  3. Impregnated activated carbon used as a bacteria inhibitor in drinking water filters
  4. Removal of taste and odor causing compounds such as MIB and geosmine
  5. Recovery of gold
  6. Removal of chlorine and chloramine

Granular Activated Carbon has a high surface area characterized by both mesopores and micropores.

  1. Consistent density
  2. Hard materials with minimal dust generation.
  3. Economical

Related Products

Go to Top